HOME  Ι  DE  Ι  EN  Ι  FR  Ι  ESRUES  Ι  RU
You are here: www.bvm-brunner.de - Compacta - Compacta EGS

Compacta EGS - Full overwrap machine

Folienverpackungsmaschine Compacta EGS

Compacta EGS 5022, 7522 and 10022

The Compacta series of overwrapping machines – designed for fully automatic packaging.The product flow is inline, also the wrapping cycle is sensor-controlled to facilitate manual or automatic loading.

Items are wrapped in centre-folded film that is sealed on the three remaining edges. Feeding systems ensure superior performances; production speeds of more than 100 packs/minute are achievable – depending on machine configuration and product.

The heated, constant-temperature sealing system can seal all industry standard films, from Polyethylene to Polyolefin to PVC. The BVM side knife produces neat, high-integrity seals, especially when Polyolefin film is used.

Product changeovers do not require the turning of hand wheels or adjustments of product guides, therefore changeover times are short and operational reliability is increased.

Each Compacta 5022, 7522, 10022 has an upper format limit of 450, 700, 950 mm respectively. A format limit is the sum of product width plus product height. This way the Compacta series provide professional packaging solutions for a wide variety of applications.

Technical Data

Compacta 5022

Compacta 7522

Compacta 10022

Approximate format:

450 mm

700 mm

950 mm

Sealing width:

500 mm

750 mm

1000 mm

Passage height:

220 mm

220 mm

220 mm

Zusatzausstattung:

-------------

bis 360 mm

bis 360 mm

Additionally possible:

650/650 mm

850/850 mm

1150/1150 mm

Speed:

up to 120T/min*

up to60T/min*

up to 45T/min*

Productinfeed:

Manual or automatic, product infeed controlled by horizontal or vertical photocells

Film Types:

elektrisch über Tastschalter ohne Handräder, stufenlos einstellbar

Folienqualitäten:

PE-/PVC-/Polyolefin and other heat sealable centre folded films Film thickness 8 to 100 micron (A film centrefolder can be supplied as an option to fold flat films

Film Unwind:

Motor driven roller cradle without mandril, infinitely variable speed controlled by dancer bar

Waste Strip Wind up:

Sufficient capacity for approximately one roll of length 1250 m of 15 micron*

Cross seal:

Constantly heated, maintenance free with passage height and speed infinitely varialble*

Sealin Jaw Drive:

Mechanical without brake (wear free) counter movement with pack safety system*

Length Seal:

Continuously heated, continuously operating suitable for all the above films for unlimited product lengths "Film draw off roller system Pat applied for" for films of 8 my, weak shrinkfilms, and product height over 150 mm*

In and Outfeed Conveyor:

Infinitely adjustable speed via frequency controller (available on Trend as an option). Seal bar bridge between infeed and outfeed for short products available as an option*

Control System:

Free profammable PLC, touch panel and memory for 100 specific product settings, or 500 as an option (except Compacta Konti)

Sensors:

Cable connected screwed plug sockets, contact free with indicator diodes

Air connection:

6 bar bauseits

Zubehör:

Fully automatic motorised format change*

* dependent on product format and model
Subject to technical changes

Touch Panel Control

graphical user interface simplifies operating the machine.

Intuitive user guidance settings. Input of product dimensions
at the touch screen.*

recall of machine settings
from job settings memory, push-button changeover.*

*depending on fitted options

Optional Accessories

BVM Adjustable Draw-Off Rollers*
increase reliability and
minimise film usage.

*registered design

Easy Accessible Film Cradle
makes reel changing
operator friendly.

Pusher*
mounted on the infeed conveyor of a Compacta, the pusher is designed for round products such as beaker lids and reels of adhesive tape. The pusher is easily removed, the infeed conveyor can function either as a feed conveyor or as a pusher unit.
*registered design

 

Feeder A 3535
for feeding products directly from a magazine stack onto the feed conveyor
of a packaging machine, designed for feeding products – such as journals, catalogues, CDs, DVDs – that can be moved from the bottom of a stack by a shuttle mechanism with suction.

Label Applicator
for applying pre-printed labels or labels printed by an integral printing unit that is available as an option.

Centrefolder
available as retrofit unit or integrated in a machine during assembly. Single-wound film can be used with a BVM Centrefolder; the use of single-wound film increases production time by halving the number of reel changes; the Centrefolder unit also simplifies wrapping with preprinted film.

Examples
  • Folienverpackungsmaschine Beispiel Kekse
  • Folienverpackungsmaschine Beispiel Zahnbuersten